• 1/4"-20 male thread on one side
• Accepts any stud or tubing up to 5/8" (16mm)
• Mount monitors, off camera flashes or lightweight accessories
• Limited two-year warranty

• Refillable 22.4lb (10.2kg) capacity sandbag
• Extra rivets, double stitching, interior bias binding for maximum strength
• Double handles on both top and bottom for more comfort. Hook and loop closure to support contents staying inside the bag
• Limited two-year warranty

• Quick mounting clamp for off-camera flash
• Alli Clamp with 5/8" baby studded tapped with a 3/8"-16 female thread and a baby receiver
• Steel construction
• Limited two-year warranty

• Fork has four pointed steel pins with a black coating
• Fork stabs into the foam center for stability, then stud can be placed in a grip arm or other receiver
• Weight: 0.4kg (0.88 lbs)
• Comes with a 5/8" baby stud
• Limited two-year warranty

• Replacement base for Master C- Stands with Turtle Base.
• Can be used as a very low stand
• Patented spring ring locking system enables you to open and close the base in under a second
• Zinc alloy casting for extra strength
• Max load: 66.1lbs (30Kg) Max height: 13.8" (35cm)

• 6 butterfly nuts equipped on the bar for a maximum of 6 lighting fixtures
• A compatible fit for a universal stand
• Solid steel square tube
• Length: 55.9in (1420cm)
• Max load 26.4lbs (12kg) for two sides. One side only, max load 13.2lbs (15kg).

• The center base accepts 45mm diameter tubes.
• Leg diameter: 22mm with 49.6" (126cm) footprint
• Useful where a solid ceiling surface is too high, too fragile or when outside
• Converts a Kupole to a conventional stand if need when ceiling is higher than 12' (3.6M)
• Also good for when a free-standing background is needed

• 5/8" F to 5/8" M
• Most often used on booms arms
• Features a baby receiver and a baby pin
• Additional knob on the elbow keeps the lighting fixture from moving when a specific angle is needed
• Weight: 0.62kg (1.37lbs)

• Allows the spigot to be attached to a lighting yoke
• 28mm steel spigot
• M12 thread with wing nut
• Length: 5.5 inches (139.9mm)
• Chrome plated

Remote Audio Boomboy Low Cost Boom Pole Holder