Audio / Video Accessories

1. A form-fitting cage designed for Atomos Ninja V.
2. NATO rails on the top and bottom.
3. 1/4’’-20, 3/8’’-16 and ARRI locating holes.
4. An HDMI cable clamp included.
5. Drive locks for Atomos Master Caddy II.

1. For balancing your camera on Gimbal Stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 100g Counterweight, 1.1” in diameter.

1. For balancing your camera on gimbal stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 200g counterweight, 1.46” in diameter.

• Shoe Mount for 501 and 502 Monitors
• Enables Pan and Tilt Adjustments
• Attaches to Back of Monitor
• Adjustable Pan/Tilt Friction Levels

• Start/Stop Remote Trigger Button
• 1/4"-20 & ARRI 3/8"-16 Accessory Mounts
• 3 x Cold Shoes
• Anti-Slip Front Cold Shoe

• Designed for DJI RS 2/RSC 2 Gimbal.
• Allows for low angle shot and reduce arm fatigue.
• Built-in 1/4”-20 threads, ARRI 3/8”-16 locating holes, and cold shoe accessory mounts.
• Tighten by ratchet knob, angle adjustable to 180°, can be used as side grip.
• Built-in NATO rail with anti-removal spring stud.
• Matte surface perfectly matches with the industrial design of the stabilizer.

• 1. Designed for DJI RS 2/RSC 2 stabilizer.
• 2. Plentiful mounting options for attaching a monitor, action camera and sound receiver, etc. 
• 3. Monitor can be adjustable with a tilt angle of about 165° and can be stopped at any angle without tools.
• 4. Build-in 1/4”-20 threaded holes, dual cold shoe.
• 5. Clamps to each side of RS 2&RSC 2 via quick-release NATO clamp with anti-removal stud.
• 6. Matte surface perfectly matches with the industrial design of the stabilizer.

• Secures HDMI Cable to Camera
• Prevents Unintentional Disconnection

• For SmallRig R5 and R6 Cage 2982.
• Attaches to the cage with two M3 screws.
• Secures both HDMI and USB-C cables.
• Prevents Accidental Cable Disconnects.

1. Upgraded 15mm rod connector with a more stable design.
2. Allows you to connect any of our threaded 15mm rods.
3. Easy Connection: just simply screw it to one rod firstly, then connect the second rod and it's done.