Accessories

• Designed for ZHIYUN CRANE 3S Gimbal.
• Horizontal Adjustable Handgrip.
• 1/4"-20 & 3/8”-16 Accessory Mounts.
• Integrated NATO Rail & Cold Shoe on Each Side.
• Disassembles into Five Parts with Quick Release Design.
• Compatible with Original Tripod.

1. Designed for Sony mirrorless cameras.
2. Remote control of the camera. 
3. Made of handcrafted rosewood, comfortable and attractive.
4. The handgrip can be adjustable with a range of 360°
5. Ergonomic design provides a comfortable grip.

• Balance Heavy Cameras on Gimbal
• For DJI Ronin-S & Ronin-SC Gimbals
• For Zhiyun-Tech CRANE & WEEBILL LAB
• Mounts onto Gimbal Side Arm

• Sliding Offset Camera Positioning
• Mount BMPCC 6K & 4K Camera on Gimbal
• For DJI Ronin-S & Zhiyun Crane-2 Gimbals
• Also Works with Moza Air 2

1. Modular Cage Designed for SIGMA fp Camera.
2. Multiple 1/4"-20 & ARRI 3/8”-16 Accessory Threads.
3. Integrated Cold Shoe Mount for Mic or Light.
4. Clamps Both HDMI and USB Cables on the Left Side.
5. Built-in Flat-Head Screw Driver.
6. Compatible with Sigma LVF-11 LCD Viewfinder.

• Shoe Mount for Accessories
• Designed for DJI Ronin-S and Ronin-SC
• Mounts with Two Captive M4 Screws
• Safety Locking Design to Prevent Slips

• For SmallHD FOCUS 5" On-Camera Monitors
• Anti-Twist Design with Dual Lock Points
• Multiple 1/4"-20 and 3/8"-16 Threads
• Dark Olive Finish, Sun Hood Included

1. Supports 5” and 7” monitor up to 1.2kg.
2. Swivel 360° and tilt 140° with free-stop in any position.
3. Features holes on thumbscrews for hex spanner.
4. Rubber pad on the top to prevent scratch.
5. CNC-Machined aluminum construction, robust & durable.

1. Fits Samsung T5 SSD, Angelbird SSD2go PKT, Glyph Atom SSD, SanDisk 1T SSD, G-Technology G-DRIVE Mobile SSD and more.
2. Spring-loaded clamp holds the SSD securely.
3. Mounts to the camera rig by the cold shoe or 1/4"-20 screws.
4. A USB-C cable clamp included.
5. Soft rubber pads inside preventing scratches.

• Fits Microphones 0.7 to 1" in Diameter
• Cold Shoe Mount
• Silicone Pads Cushion Mic Against Bumps
• Thumbscrew Fastener

1. Designed for DJI Ronin S Gimbal.
2. Allows balancing of front-heavy camera setup.
3. Comes with rows of 1/4”-20 threaded holes to support counterweights.
4. Features precise scale on the side to mark camera position.
5. Compatible with the original lens support of Ronin S.
6. Comes with rubber pad to prevent scratching your camera.

1. A form-fitting cage designed for Atomos Shinobi.
2. NATO rails on the top and bottom.
3. 1/4’’-20, 3/8’’-16 and ARRI locating holes.
4. HDMI cable clamp included.

1. Compatible with Sony A6400 cage 2310. 
2. Nice sized wooden handgrip on the right for a better hand-held shooting experience.
3. Maintains the infrared receiver of camera access.
4. Avoids the uncomfortable hand-held shooting due to the overheating of the camera.

1. A dedicated baseplate designed for BMPCC 4K & 6K.
2. Arca compatible QR plate and receiver on the top and secured by a knob screw.
3. 15mm rail support at 85mm rod height.
4. Arri standard dovetail on the bottom.
5. 1/4"-20 and 3/8"-16 threaded holes on the bottom for attachment of other plates.

1. A dedicated baseplate designed for BMPCC 4K & 6K.
2. Manfrotto 501PL compatible QR plate and receiver on the top and secured by a lever.
3. 15mm rail support at 85mm rod height.
4. Arri standard dovetail on the bottom.
5. 1/4"-20 and 3/8"-16 threaded holes on the bottom for attachment of other plates.

1. Accommodate and protect Samsung T5 SSD.
2. Switchable to be used on both left and right hands.
3. Compatible with SmallRig BMPCC 4K & 6K cage 2203, 2254 and 2255, and Z CAM E2 cage 2264.
4. 1/4 and 3/8 threaded holes on the top for attaching accessories.
5. Ergonomic design and comfortable grip.

1. A form-fitting cage designed for Atomos Ninja V.
2. NATO rails on the top and bottom.
3. 1/4’’-20, 3/8’’-16 and ARRI locating holes.
4. An HDMI cable clamp included.
5. Drive locks for Atomos Master Caddy II.

1. For balancing your camera on Gimbal Stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 100g Counterweight, 1.1” in diameter.

1. For balancing your camera on gimbal stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 200g counterweight, 1.46” in diameter.

1. Supports 5” and 7” monitor up to 1.2kg.
2. Swivel 360° and tilt 150° allows free-stop in any position.
3. Hex spanner holes for re-tighten the screw to ensure safe. 
4. Rubber pads on the top to prevent scratching your monitor. 
5. Weighs only 68g, easy for storage.

• The plate utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig with your battery's power port(s).
• Two stoppers prevent the battery from twisting when attached.
• It comes with a dual 15mm rod clamp to help mount the plate to your 15mm LWS rod system in a variety of different installation ways.
• The Plate itself features multiple 1/4-20" countersinks, M3 countersinks, M4 countersinks, 1/4-20" thread holes, M4 thread holes, and an ARRI 3/8" -16 thread hole to attach a dual rod clamp, a magic arm, or other accessories.
• It's compatible with the Blackmagic URSA mini.

• Designed for DJI RS 2/RSC 2 Gimbal.
• Allows for low angle shot and reduce arm fatigue.
• Built-in 1/4”-20 threads, ARRI 3/8”-16 locating holes, and cold shoe accessory mounts.
• Tighten by ratchet knob, angle adjustable to 180°, can be used as side grip.
• Built-in NATO rail with anti-removal spring stud.
• Matte surface perfectly matches with the industrial design of the stabilizer.

• 1. Designed for DJI RS 2/RSC 2 stabilizer.
• 2. Plentiful mounting options for attaching a monitor, action camera and sound receiver, etc. 
• 3. Monitor can be adjustable with a tilt angle of about 165° and can be stopped at any angle without tools.
• 4. Build-in 1/4”-20 threaded holes, dual cold shoe.
• 5. Clamps to each side of RS 2&RSC 2 via quick-release NATO clamp with anti-removal stud.
• 6. Matte surface perfectly matches with the industrial design of the stabilizer.

SMALLRIG Aluminum Alloy Pair of 15mm Rods(M12-4inch)