Accessories

• HOSA XLR3F to Dual XLR3M 6 in Y Cable

• Silver-Plated REAN Connectors
• 24AWG Oxygen-Free Copper Conductors
• 90% OFC Spiral Shield

• HOSA 20' XLR3F-XLR3M AES/EBU Cable

• XLR connectors with internal strain relief for rugged reliability
• 24 AWG Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
• Hi-density OFC braided shield for superior EMI and RFI rejection

• Standard 3.5mm Connectors

• HOSA 3.5mm TRS to Same 10 ft Stereo Interconnect

• Original Neutrik connectors for security and durability
• 20 AWG Oxygen-Free Copper (OFC) conductors for maximum signal transfer
• Low capacitance wire for crystal-clear high-frequency transmission
• Ideal for any stage or studio
• Designed to provide a lifetime of outstanding performance

• Original Neutrik connectors for security and durability
• 20 AWG Oxygen-Free Copper (OFC) conductors for maximum signal transfer
• Low capacitance wire for crystal-clear high-frequency transmission
• Conductor(s): 20 AWG x 2 OFC
• Connector(s): Neutrik XLR3F to XLR3M
• Length: 3 ft
• Shield: 95% OFC Braid

• Analog to SDI Conversion
• Embedded Audio

• Converts SDI to HDMI & HDMI to SDI
• Simultaneous Conversions
• 1 x Input & 1 x Output SD/HD/3G-SDI
• 1 x Input & 1 x Output HDMI

• 10-Bit HD/SD Capture and Playback
• USB 3.0/3.1 Gen 1
• 10-Bit HDMI Video Direct Capture
• Separate Sides for Inputs and Outputs

• Stream Any SDI or HDMI Signal in 720p HD
• Connect Virtually Any SDI or HDMI Camera
• Presents SDI/HDMI Source as USB Webcam
• Built-In Teranex Conversion Technology

• Playback Aspect of Capture/Playback Card
• Outputs Footage from Computer to Monitor
• Enables Color Grading on Top-Res Monitor
• SDI, HDMI, Thunderbolt / Embedded Audio

• Supports NTSC/PAL/HD/UltraHD 4K @ 10-bit
• Supports 4K Resolution Over SDI or HDMI
• 4 x 6G-SDI & 4 x HDMI Inputs (4k/HD/SD)
• Tri-Sync/Blackburst Ref. Sync Input

SMALLRIG 15mm Rods (2.5 Inch, 2pcs)

1. Used with any industry-standard 15mm rod rail system.
2. The clamp is solidly engineered with high-quality aluminum alloy for durability.
3. One locking ratchet lever to tighten rod clamp and cold shoe. 
4. 1/4" threads for attaching more accessories.

• Full Cage for Mirrorless Camera or DSLR
• Compatible with Smaller Cameras
• Adjustable Height & Width on Both Sides
• Non-Slip Camera Plate with 1/4"-20 Screw
• 1/4"-20 & 3/8"-16 Accessory Threads
• Hot Shoe Adapter
• Includes 2 x Short & 2 x Long Side Arms
• Aluminum Alloy Construction

• Four-Point Suspension System
• Fits Mics Measuring 0.6-1.6" in Diameter
• Locking Tilt Knob
• Includes Shoe Mount

• Isolates microphone from vibration and noise.
• Fits Mics Measuring 0.59-1.57"(15-40mm) in Diameter.
• Mount onto 15mm Rods Directly.
• Angle is adjustable to adapt different shooting scene.

• Pair of 15mm Rods
• Lightweight Carbon Fiber Construction

1. Mounts monitor or LED Lights via 1/4’’ screw.
2. Compatible with any mounting gear of 15-54mm and tightened by the locking knob.
3. Quick attach and detach from a monitor.
4. Can be adjusted with ease.

Cool-Ballhead-V1 Multi-function Double Ballhead w/Clamp&1/4Screw

1. 7cm standard quick release safety nato rail is part of smallrig nato handle 2003.
2. It can be attached to any 1/4-20 holes via 1/4’’-20 screws.
3. It features spring loaded pins on both ends to prevent accidental removal.
4. Compatible with smallrig rigs with nato clamp, RED Epic, RED Scarlet, Black Magic Camera and so on or other third party camera accessories.

1. Stainless steel rosette joint, much stronger and more stable.
2. Stainless steel ends

1. Stainless steel Rosette joint, much stronger and more stable.

2. Stainless steel ends.