Accessories

• SENNHEISER Handheld cardioid dynami
• with MZQ800 clip
• 11.6 oz

• Very fast setup
• Plugs directly into XLR audio input
• Ultra compact receiver
• Switches on/off by P48 Phantom power
• Optimized dynamic range
• Auto frequency management
• AES 256 encryption
• License free
• Accessories included for DSLR use
• Metal housing

• Very fast setup
• Plugs directly into XLR audio input
• Ultra compact receiver
• Switches on/off by P48 Phantom power
• Optimized dynamic range
• Auto frequency management
• AES 256 encryption
• License free
• Accessories included for DSLR use
• Metal housing

• SENNHEISER KA600 XLR3 to 3.5mm Connector Cable
• For Shotgun Mics

• 3.5mm Locking Connection from Receiver
• 3.5mm Right-Angle Connection to Camera
• 20" Length

• SENNHEISER CL100 XLR unbalanced line output cable
• 1/8" to male XLR

• Camera Mount Adapter
• For EK100G3 and EK2000

• Mobile Journalist, Vlogger, Run & Gun
• For Cameras and Portable Recorders
• 300-Hour Run Time via AAA Battery
• Sensitivity and Bass Roll-Off Switches

• Mesh Grille
• For ME2 mic

• SENNHEISER Windscreen for MKE400

• For Mobile Journalist, Videographer
• ME 2-II Omnidirectional Lav Mic
• Rugged Bodypack Transmitter
• Diversity Camera-Mount Receiver
• 1680 Auto-Scan Frequencies
• Advanced Controls for Flexible Use
• Daylight-Readable Display
• 8-Hour AA Batteries
• Up to 12 Mics on Set / 330' Range

• For LaCie Rugged SSD.
• Attaches to Cage With Two Captive 1/4”-20 Screws.
• Secures SSD & USB Type-C Cable.
• Thumbscrew Fastener.

• Top handle special screw designed for SONY FX9/FS7/FS7 MK2.
• Provide a quick adjustment solution for the rod on the front of the SONY original top handle.
• Tinny and comfortable.

• Designed for ZHIYUN CRANE 3S Gimbal.
• Horizontal Adjustable Handgrip.
• 1/4"-20 & 3/8”-16 Accessory Mounts.
• Integrated NATO Rail & Cold Shoe on Each Side.
• Disassembles into Five Parts with Quick Release Design.
• Compatible with Original Tripod.

• Designed for Nikon Z50 Camera.
• 1/4"-20 Accessory Threads on the Side and Bottom.
• Integrated Cold Shoe Mount for Mic or Light.
• Built-in Flat-Head Screw Driver.
• Maintains Access to the Tilting Screen.
• Rubber Pad to Protect Camera.

• Arca-Type Compatible Clamp for Gimbals.
• Quick Release the Camera using an Arca Plate Between Gimbals and Tripods.
• Install on the Gimbals Camera Plate via two 1/4” Screws.
• Degree Markings on Each Side.
• Vertical or Horizontal Installation.
• Features M4 Threaded Holes for DJI Ronin S/ Ronin SC Follow Focus Motor.

• Formfitting Camera Cage
• Ergonomic Wooden Right-Side Grip
• 1/4"-20, 3/8"-16 & ARRI-Style Threads
• Top Shoe Mount, 1/4"-20 Camera Screws

1. Designed for Sony mirrorless cameras.
2. Remote control of the camera. 
3. Made of handcrafted rosewood, comfortable and attractive.
4. The handgrip can be adjustable with a range of 360°
5. Ergonomic design provides a comfortable grip.

• Formfitting Camera Cage
• 1/4"-20 and 3/8"-16 Accessory Threads
• 3 x ARRI-Style Accessory Hole
• Single Cold Shoe Mount

• Moves Shoe Mount to Camera's Right-Side
• Doesn't Obstruct Fold-Out Screen
• Shoulder Strap Slot

• Formfitting Camera Cage
• 2 x Cold Shoe Mounts
• 1/4"-20 and 3/8"-16 Accessory Threads
• Single ARRI-Style Accessory Hole

• Balance Heavy Cameras on Gimbal
• For DJI Ronin-S & Ronin-SC Gimbals
• For Zhiyun-Tech CRANE & WEEBILL LAB
• Mounts onto Gimbal Side Arm

• Sliding Offset Camera Positioning
• Mount BMPCC 6K & 4K Camera on Gimbal
• For DJI Ronin-S & Zhiyun Crane-2 Gimbals
• Also Works with Moza Air 2

• Formfitting Camera Cage
• 1/4"-20 & 3/8"-16 Accessory Threads
• Maintains Access to Camera's Hot Shoe
• ARRI-Style Accessory Mounts on Top

• For PSC 2428 SmallRig Shoulder Strap
• Included 2 Rapid Link Connectors & Bases
• Use for Quick Release