Accessories

1. A dedicated baseplate designed for BMPCC 4K & 6K.
2. Arca compatible QR plate and receiver on the top and secured by a knob screw.
3. 15mm rail support at 85mm rod height.
4. Arri standard dovetail on the bottom.
5. 1/4"-20 and 3/8"-16 threaded holes on the bottom for attachment of other plates.

1. A dedicated baseplate designed for BMPCC 4K & 6K.
2. Manfrotto 501PL compatible QR plate and receiver on the top and secured by a lever.
3. 15mm rail support at 85mm rod height.
4. Arri standard dovetail on the bottom.
5. 1/4"-20 and 3/8"-16 threaded holes on the bottom for attachment of other plates.

1. Accommodate and protect Samsung T5 SSD.
2. Switchable to be used on both left and right hands.
3. Compatible with SmallRig BMPCC 4K & 6K cage 2203, 2254 and 2255, and Z CAM E2 cage 2264.
4. 1/4 and 3/8 threaded holes on the top for attaching accessories.
5. Ergonomic design and comfortable grip.

1. A form-fitting cage designed for Atomos Ninja V.
2. NATO rails on the top and bottom.
3. 1/4’’-20, 3/8’’-16 and ARRI locating holes.
4. An HDMI cable clamp included.
5. Drive locks for Atomos Master Caddy II.

1. For balancing your camera on Gimbal Stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 100g Counterweight, 1.1” in diameter.

1. For balancing your camera on gimbal stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 200g counterweight, 1.46” in diameter.

1. Supports 5” and 7” monitor up to 1.2kg.
2. Swivel 360° and tilt 150° allows free-stop in any position.
3. Hex spanner holes for re-tighten the screw to ensure safe. 
4. Rubber pads on the top to prevent scratching your monitor. 
5. Weighs only 68g, easy for storage.

5 x Fixing Screws

Total Length: 16mm
Shaft Length:12.5mm
Threaded Shaft Length:7mm
Net Weight:75g

5 x 1/4"-20 threads

Product Dimensions: 14.5x14x6.23mm
Net Weight: 27g
Package Size: 70x100x20mm
Package Weight: 29g
Material: Stainless Steel

• 1 x base plate
• 1 x 1/4'' fixing screw
• 1 x 3/8'' fixing screw
• 2 x 1/4''-20 screw
• 1 x hex spanner