Accessories

1. Accommodate and protect Samsung T5 SSD.
2. Switchable to be used on both left and right hands.
3. Compatible with SmallRig BMPCC 4K & 6K cage 2203, 2254 and 2255, and Z CAM E2 cage 2264.
4. 1/4 and 3/8 threaded holes on the top for attaching accessories.
5. Ergonomic design and comfortable grip.

1. A form-fitting cage designed for Atomos Ninja V.
2. NATO rails on the top and bottom.
3. 1/4’’-20, 3/8’’-16 and ARRI locating holes.
4. An HDMI cable clamp included.
5. Drive locks for Atomos Master Caddy II.

1. For balancing your camera on Gimbal Stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 100g Counterweight, 1.1” in diameter.

1. For balancing your camera on gimbal stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 200g counterweight, 1.46” in diameter.

1. Supports 5” and 7” monitor up to 1.2kg.
2. Swivel 360° and tilt 150° allows free-stop in any position.
3. Hex spanner holes for re-tighten the screw to ensure safe. 
4. Rubber pads on the top to prevent scratching your monitor. 
5. Weighs only 68g, easy for storage.

• Fits iPad or other tablets like Samsung, Huawei, etc., from 7.9” to 12.9” to use the tablet as a director monitor.
• Multi mounting options: two cold shoe mounts, multi 1/4” threaded holes.
• Quick mount/dismount to an Arca-Swiss style tripod.
• Built-in rubber pads will prevent scratches on the iPad.
• Lightweight design, 184g only.

SMALLRIG V Mount Battery Plate

• The plate utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig with your battery's power port(s).
• Two stoppers prevent the battery from twisting when attached.
• It comes with a dual 15mm rod clamp to help mount the plate to your 15mm LWS rod system in a variety of different installation ways.
• The Plate itself features multiple 1/4-20" countersinks, M3 countersinks, M4 countersinks, 1/4-20" thread holes, M4 thread holes, and an ARRI 3/8" -16 thread hole to attach a dual rod clamp, a magic arm, or other accessories.
• It's compatible with the Blackmagic URSA mini.

• Designed for DJI RS 2/RSC 2 Gimbal.
• Allows for low angle shot and reduce arm fatigue.
• Built-in 1/4”-20 threads, ARRI 3/8”-16 locating holes, and cold shoe accessory mounts.
• Tighten by ratchet knob, angle adjustable to 180°, can be used as side grip.
• Built-in NATO rail with anti-removal spring stud.
• Matte surface perfectly matches with the industrial design of the stabilizer.

• 1. Designed for DJI RS 2/RSC 2 stabilizer.
• 2. Plentiful mounting options for attaching a monitor, action camera and sound receiver, etc. 
• 3. Monitor can be adjustable with a tilt angle of about 165° and can be stopped at any angle without tools.
• 4. Build-in 1/4”-20 threaded holes, dual cold shoe.
• 5. Clamps to each side of RS 2&RSC 2 via quick-release NATO clamp with anti-removal stud.
• 6. Matte surface perfectly matches with the industrial design of the stabilizer.

• Compatible with Sony Multi-Terminal Cameras
• Works With SmallRig Control Handle HTN 2670 and 2880
• Control Recording Start and Stop
• Sony Multi to Type C Connector

• Formfitting Full Cage.
• Firmly Fixed to Camera by a 1/4"-20 Screw and an M2.5 Screw.
• 1/4"-20 & 3/8"-16 Threads and ARRI-style Mounts.
• Integrated NATO Rail and Cold Shoe Mount.
• Built-in Screwdriver on the Bottom.

SMALLRIG Aluminum Alloy Pair of 15mm Rods(M12-4inch) 

SMALLRIG 15mm Black AL Alloy Rod (M12-20cm) 8" (2 pcs) 

SMALLRIG 15mm Black AL Alloy Rod (M12-25cm) 10" (2 pcs) 

SMALLRIG Thread Adapter 1/4" to 3/8" (5 pcs)

• Secures HDMI Cable to Camera
• Prevents Unintentional Disconnection

• For SmallRig R5 and R6 Cage 2982.
• Attaches to the cage with two M3 screws.
• Secures both HDMI and USB-C cables.
• Prevents Accidental Cable Disconnects.

• Lightweight
• Highly rigid
• Corrosion resistant

• Formfitting Full Cage for Panasonic GH5 and GH5S.
• Multiple 1/4"-20 & 3/8"-16 & ARRI 3/8”-16 Accessory Threads.
• Integrated Cold Shoe & NATO Rail.
• Locks Camera via 1/4"-20 & M2.5 Screw to Prevent Twisting.
• Built-in Flat Head Screw Driver on the Bottom.
• Compatible with HDMI Cable Clamp 1822 and DMW-XLR1 Helmet Kit HTS2367.

• Lightweight, Black Aluminum Alloy
• Extendable via Integrated 12mm Threads
• For Camera Accessory Mounting
• Includes End Caps

• Arca-Type Compatible Dovetail Mount
• Quick Release Function on Both Axes
• Anti-Twist Design and Rubber pad
• 1/4"-20 Threaded Holes for Accessories
• Maintains Access to Camera Battery
• Lightweight Aluminum Alloy Construction

• Formfitting Camera Cage
• 1/4"-20 & 3/8"-16 Accessory Threads
• Shoe Mount, NATO Rail
• Maintains Access to Ports & Controls

• Start/Stop Remote Trigger Button
• 1/4"-20 & ARRI 3/8"-16 Accessory Mounts
• 3 x Cold Shoes
• Anti-Slip Front Cold Shoe

• 2-Pack of Universal Magic Arms
• Mount a Light, Monitor, Microphone
• Two Rotating Ball Heads
• Two 1/4"-20 Mounting Screws at Each End