Accessories

• For Blackmagic Design Pocket Cinema Camera 4K/6K.
• Connects to SmallRig NP-F Battery Plate.
• DC5525 to LEMO 2-Pin Connector.
• 40cm-Long Cable.

• Ergonomic design, comfortable grip experience
• Adjustable to different cage height and a quick switch from left to the right side
• Additional mounting options through the cold shoe and strap eyelet
• Lightweight and portable design

• Formfitting full Cage for Nikon Z5/Z6/Z7/Z6II/Z7II Camera.
• Multiple 1/4"-20 & ARRI 3/8”-16 Accessory Threads.
• Integrated Cold Shoe & NATO Rail.
• Locks Camera via 1/4"-20 & M2.5 Screw to Prevent Twisting.
• Built-In Flat Head Screwdriver with Allen Wrench on the Bottom.

The NiSi Macro Focusing Rail NM-180 with 360 Degree Rotating Clamp gives you the ability to precisely adjust the position of your camera when shooting macro photography. The rail is equipped with an integrated Arca-type compatible quick release clamp and also includes an Arca-type plate.  The focusing rail itself has a double-dovetail mount and will fit most Arca-type clamps on the market.  The mounting clamp allows 360-degree rotation to change the camera direction without having to remove the plate from the clamp. The adjustment range is 160mm while the clamp size is 180mm, maximizing the movement of the camera. The movement is adjusted by a Collapsible Thumb-Screw Knob which makes it easy to adjust and store.  Included is a longer quick-release plate designed for telephoto lenses and with a groove for straps and is easy to lock and release.  The maximum load of the rail is 5kg.

The Macro Rail can be mounted in most Arca-type clamps/ball heads on the market and also includes four detachable foot nails that allow the use of the rail directly on the tabletop.  The stage travel per revolution is 1.25mm with engraved index marks on both sides of the rail for fine adjustments.  The bottom for the rail includes 3/8” and ¼” screw hole which allows the use of all tripod heads.

The NiSi Macro Focusing Rail NM-180 with 360 Degree Rotating Clamp is constructed with high-quality CNC machined aluminum and is hard anodized with a corrosion-resistant finish. These features make it scuff and scratch-resistant.

The two focusing rails can be stacked for dual-axis adjustments.

• Designed to be used with ALL smart phones
• Rear or front-facing camera
• Rotated 360 degrees
• Rapid mounting clip design
• Holds 2 filters

• Compatible with Rode Wireless Go & Saramonic Blink 500.
• Set the two receivers up stably.
• Featuring a cold shoe mount, it can be mounted on the camera and the cage directly.
• Combine the two 3.5mm audio sources into one and still editable separately.

• Form-fitting Cage for Canon EOS R.
• Provides Protection and Accessory Mounts.
• 1/4"-20 & 3/8"-16, ARRI 3/8”-16 Accessory Threads and Cold Shoe Mount.
• Built-in Arca Swiss Plate and Flate Screwdriver.
• Locks Camera via 1/4"-20 & Two Anti-Twist Pins.

• Design for DJI RS 2/ RSC 2 & Ronin-S and ZHIYUN gimbals.
• Balance front-heavy cameras on the gimbal.
• Clamps onto the rear of the Manfrotto camera plate with thumbscrew.
• Multiple 1/4"-20 threaded holes for adding counterweights.
• 2 x 100g counterweights Included

• A dedicated sun hood working with SmallRig Cage for Ninja V 2209.
• Enhance the viewing experience in harsh lighting conditions.
• Fitted into the cage by four velcro tapes.

• Dual 15mm LWS Rod Clamps
• Use Rod Clamps Separately or Together
• 1/4"-20 and 3/8"-16 Mounting Threads
• Nonslip Top Surface
• Thumb-Lever Locks

• Designed to work with SmallRig L-Bracket 2122, 2236 and 2258.
• Compatible with HDMI cables of various size.
• Quickly fix the cable by a knob screw.

• A dedicated form-fitting cage for BMPCC 4K and 6K
• Built-in Manfrotto 501PL plate allowing quick release of camera in 2 seconds
• Multiple mounting interfaces (NATO rails, 1/4’’-20 and 3/8’’-16 threaded holes, ARRI locating holes and cold shoe) for attaching accessories
• Form-fitting design with unobstructed camera grip, button, port, venting and battery access
• Compatible with SmallRig Mount for Samsung T5 SSD, HDMI & SSD Cable Clamp and Lens Mount Adapter Support and other accessories

• Form-fitting kit for Canon C70, compact, lightweight, portable, with integrated design.
• Features multiple 1/4”-20, 3/8”-16 threaded holes, cold shoes, and ARRI 3/8" -16 locating holes, available for attaching a wide range of accessories.
• Top handle allows handheld shooting and makes it easy to carry the camera.
• Top plate shares the same locking part with the camera and supports the original handle.
• Bottom plate comes with two 1/4”-20 threaded holes for mounting the Arca Swiss Plate of DJI RS2.
• Built-in flat-head screwdriver and Allen Wrench for easy access.