Search results for: 'Sony e'

• E-Mount Lens/Full-Frame Format
• Aperture Range: f/5.6 to f/36
• Five ED Elements, One Aspherical Element
• Nano AR Coating and Fluorine Coating

• E-Mount Lens/Full-Frame Format
• Aperture Range: f/1.8 to f/22
• One Aspherical Element
• Linear Autofocus Motor; Internal Focus

• 20.1MP 1" Exmor RS BSI CMOS Sensor
• BIONZ X Image Processor & Front-End LSI
• ZEISS Vario-Sonnar T* f/2.8-4.5 Lens
• 24-200mm (35mm Equivalent)

• Dimensions: 80 mm x 58 mm x 25 mm
• Weight: 67 g
• Input DC 5 V 2.2 A (Min) via USB-A port
• Output DC 8.4 V 
• Output current 600 mA

Charging time is approximately 2 hours 30 minutes from depleted to 100% for 2 batteries charging simultaneously.

• Dimensions: 80 mm x 58 mm x 25 mm
• Weight: 67 g
• Input DC 5 V 2.2 A (Min) via USB-A port
• Output DC 8.4 V 
• Output current 600 mA

Charging time is approximately 2 hours 30 minutes from depleted to 100% for 2 batteries charging simultaneously.

• Dimensions: 80 mm x 58 mm x 25 mm
• Weight: 61 g
• Input DC 5 V 2.2 A (Min) via USB-A port
• Output DC 4.2 V 
• Output current 600 mA

Charging time is approximately 3 hours 30 minutes from depleted to 100% for 2 batteries charging simultaneously.

• Button-free trigger for all Profoto AirTTL lights
• Attach to your camera’s hot shoe to wirelessly connect camera and light
• Three settings: Auto, manual and off
• Auto mode: Point and shoot with automatic flash power
• Manual mode: Fine-tune the flash settings
• Smart connectivity with the Profoto app (compatible with iPhone 7 and later)
• Small, lightweight and minimalistic design
• Built-in rechargeable LiPo battery – 30h battery life

• For Alpha a7R IV Cameras
• Holds One or Two NP-FZ100 Batteries
• Extended Grip for Vertical Shooting
• Second Shutter Button and Multi Selector

• Combination Transmitter and Receiver
• 2.4GHz Frequency
• 99 Studio Addresses, 40 Lamp Addresses
• Supports High Speed Sync

Relay Camera Couplers work in tandem with the Case Relay Camera Power System to keep your camera powered continually with an external 5V USB battery pack or wall power. The Relay Coupler is simply an insert for your camera battery cavity that enables powering the camera via Case Relay Camera Power System. The coupler does not contain a battery or hold a charge.