Search results for: 'A 0'

E-Mount Lens/Full-Frame Format

Aperture Range: f/2.8 to f/32

RXD Stepping AF Motor

Moisture-Resistant Construction

1. Designed for DJI Ronin S Gimbal.
2. Allows balancing of front-heavy camera setup.
3. Comes with rows of 1/4”-20 threaded holes to support counterweights.
4. Features precise scale on the side to mark camera position.
5. Compatible with the original lens support of Ronin S.
6. Comes with rubber pad to prevent scratching your camera.

1. A form-fitting cage designed for Atomos Shinobi.
2. NATO rails on the top and bottom.
3. 1/4’’-20, 3/8’’-16 and ARRI locating holes.
4. HDMI cable clamp included.

1. A dedicated baseplate designed for BMPCC 4K & 6K.
2. Manfrotto 501PL compatible QR plate and receiver on the top and secured by a lever.
3. 15mm rail support at 85mm rod height.
4. Arri standard dovetail on the bottom.
5. 1/4"-20 and 3/8"-16 threaded holes on the bottom for attachment of other plates.

1. For balancing your camera on Gimbal Stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 100g Counterweight, 1.1” in diameter.

1. For balancing your camera on gimbal stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 200g counterweight, 1.46” in diameter.

• Rugged, lightweight aluminium body for stable positioning on long microphone boom arms
• Lightweight high-performance voice coil construction
• Fast transient response
• Low frequency extension
• Ideal for direct use on the most problematic bass signal
• Frequency-independent directivity provides isolation from other on-stage signals
• Humbucking coil
• Integral stand mount

1. Compatible with Sony A6400 cage 2310. 
2. Nice sized wooden handgrip on the right for a better hand-held shooting experience.
3. Maintains the infrared receiver of camera access.
4. Avoids the uncomfortable hand-held shooting due to the overheating of the camera.

1. Accommodate and protect Samsung T5 SSD.
2. Switchable to be used on both left and right hands.
3. Compatible with SmallRig BMPCC 4K & 6K cage 2203, 2254 and 2255, and Z CAM E2 cage 2264.
4. 1/4 and 3/8 threaded holes on the top for attaching accessories.
5. Ergonomic design and comfortable grip.

1. A form-fitting cage designed for Atomos Ninja V.
2. NATO rails on the top and bottom.
3. 1/4’’-20, 3/8’’-16 and ARRI locating holes.
4. An HDMI cable clamp included.
5. Drive locks for Atomos Master Caddy II.