Constant Lighting

• Input: AC 90-240V 50-60Hz
• Fuse: F8AL 250V 8A
• Maximum Lamp Wattage: 75W per socket / 300W total
• Mounting: Standard 5/8"
• AC Cable :ength: 16' / 4.9 m
• Lamp Base Size: Works with E26 and E27 base lamps 

• Input: AC 90 - 240 V 50 - 60 Hz
• Maximum lamp wattage: 220 W
• Maximum heat resistance: 212 F / 100 C
• Interior color: Silver
• Mounting: standard 5/8"
• Lamp base size: works with E26 and E27 base lamps
• Weight: 1 lb 4 1/2 oz / .58 kg

Open Box!

• Marked Down From $1,479.95
• Mount: Promaster-S (Bowens compatible)
• Connectivity: Built-in TTL Receiver, 3.5mm sync. socket, and optical slave
• Output Power: 450 lx-s at 10' / 3 m (bare tube) | 1100 lx-s at 10' / 3 m (with included reflector)
• Full Power Flashes on One Battery Charge: 360
• Output Adjustment: 8 f-stops (1 - 1/128)
• Sync Speed: 1/8,000s maximum
• Flash Duration: 1/800 - 1/20,000s
• Recycling Time: 0.1 - 2 seconds
• Color Temperature: 5500K +/- 200K
• Battery: 6000 mAh 11.1 V
• Battery Charge Time: Approximately 5 hours
• Dimensions: 10 3/8" x 8" x 4 7/8" / 26.4 cm x 20.3 cm x 12.4 cm (not including reflector)
• Weight: 4 lbs 2 5/8 oz / 1.88 kg (without battery) | 5 lbs 4 oz / 2.38 kg (with battery)

• The shoe is threaded to fit any tripod
• 9 super bright daylight 5mm LED’s
• Shoe mount to any standard flash shoe
• Includes universal light bracket

ProMaster has discovered that light output based on "wattage" ratings of compact fluorescent lamps varies widely. A large variety of factors impact the output and "wattage" is not an accurate reflection of the lamp output. Based on this, ProMaster has adopted the use of a Photo Luminance Factor which more accurately reflects the light output of the ProMaster Compact Fluorescent Photo Lamps in studio use. Each lamp in the ProMaster line has been evaluated based on a single lamp in a 10" photo reflector measured at 10 feet.

• Approximately 2 hours and 15 minutes of run time at full power with one, fully charged NPF770 battery (included)
• 1 Mobile Bi-Color 10" LED Ringlight
• 1 Handle with integrated light stand mount
• 1 Phone clamp
• 1 Lightweight ball head
• 1 Cold foot for camera-top mounting
• 1 AC power cord
• 1 NPF770 Rechargeable battery
• Battery charger
• 1 Fabric storage case

• Ultrasoft panel with hidden LEDs
• Color Temperature: 3200K - 5600K +/-200K
• Battery NP-F type

• Incorporates super bright LED technology
• Works with any standard hot shoe
• Includes diffusion rings to warm or cool the color temperature
• Flash includes mounting rings for lenses with filter threads of 49, 52, 55, 58, 62, 67, 72, and 77