Studio Equipment & Accessories

• Designed to hold Kino Flo tubes.
• Built with a swivel ball joint for easy positioning and safety of the tubes.
• Change tubes safely and effectively while working with coated Kino Flo tubes.
• Limited two-year warranty

The Kupo Junior Boom Arm is made from solid steel with a black coated finish that can support a payload up to 88.2lbs (40kg) at minimum extension and up to 22lbs (10kg) when fully extended. 

This Kupo Mighty Runway Stand Base features an extra 4.7in (12cm) longer leg providing additional stability when it is necessary to make a boom rig. 

• 6 butterfly nuts equipped on the bar for a maximum of 6 lighting fixtures
• A compatible fit for a universal stand
• Solid steel square tube
• Length: 55.9in (1420cm)
• Max load 26.4lbs (12kg) for two sides. One side only, max load 13.2lbs (15kg).

• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Base is five times stronger than aluminum
• Easily remove the column and attach to the Kupo Runway Base to create a strong sturdy and safe rolling stand.
• Fitted with captive locking t-knobs on the column.
• Limited two-year warranty

• Replacement base for Master C- Stands with Turtle Base.
• Can be used as a very low stand
• Patented spring ring locking system enables you to open and close the base in under a second
• Zinc alloy casting for extra strength
• Max load: 66.1lbs (30Kg) Max height: 13.8" (35cm)

• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Base is five times stronger than aluminum
• Easily remove the column and attach to the Kupo Runway Base to create a strong sturdy and safe rolling stand.
• Fitted with captive locking t-knobs on the column.
• Designed with three varied leg heights allowing stand bases to stack on set with equipment or nest together for storage

• Fork has four pointed steel pins with a black coating
• Fork stabs into the foam center for stability, then stud can be placed in a grip arm or other receiver
• Weight: 0.4kg (0.88 lbs)
• Comes with a 5/8" baby stud
• Limited two-year warranty

• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Base is five times stronger than aluminum
• Easily remove the column and attach to the Kupo Runway Base to create a strong sturdy and safe rolling stand.
• Fitted with captive locking t-knobs on the column.
• Limited two-year warranty

• Unique spring locking system
• Extends to over 12' in height
• Extends from 39.4" - 66.9" (100cm - 170cm)
• No tools required
• Limited two-year warranty

• Unique spring locking system
• Extends to over 12' in height
• Extends from 39.4" - 66.9" (100cm - 170cm)
• No tools required
• Limited two-year warranty

• Quick mounting clamp for off-camera flash
• Alli Clamp with 5/8" baby studded tapped with a 3/8"-16 female thread and a baby receiver
• Steel construction
• Limited two-year warranty

• Refillable 22.4lb (10.2kg) capacity sandbag
• Extra rivets, double stitching, interior bias binding for maximum strength
• Double handles on both top and bottom for more comfort. Hook and loop closure to support contents staying inside the bag
• Limited two-year warranty

• 1/4"-20 male thread on one side
• Accepts any stud or tubing up to 5/8" (16mm)
• Mount monitors, off camera flashes or lightweight accessories
• Limited two-year warranty

• Unique spring locking system
• Extends to over 12' in height
• Extends from 82.7"- 145" (210cm - 370cm)
• No tools required
• Limited two-year warranty

• Adjustable arm allows positioning a camera lighting fixture or accessory within seconds
• Supports loads of up to 8.8 lbs (4 Kg)
• Large rubberized hand wheel allows joins to lock at same time for precise positioning
• Six milled flat surfaces for secure mounting
• Limited two-year warranty

• 5/8" (16mm) socket inside
• attached to ball joint so it pivots from -45°to 90° and collar rotates 360°
• Includes 3/8"-16 thread which will accept the standard dot and camera accessories
• Weight: 0.86kg (1.90lbs)
• Limited two-year warranty

• Standard VESA mounting holes 75x75mm & 100x100mm
• Supports up to 17.6lbs (8kg)
• Easy and instantaneous rotatation of a monitor from landscape to portrait viewing
• 5/8in (16mm) Baby Receiver and knob to secure to any baby light stand or accessory
• One central knob securely locks two ball heads

• nnovative modular system
• Many interchangeable accessories available
• Single knob secures both ball joints simultaneously
• Constructed from aluminum alloy

• Supports 17.6 lb, Modular System
• Interchangeable Accessories Available
• Single Knob Secures Both Ball Joints
• Aluminum Construction

• Supports 17.6 lb, Modular System
• Interchangeable Accessories Available
• Single Knob Secures Both Ball Joints
• Aluminum Construction

• Allows the spigot to be attached to a lighting yoke
• 28mm steel spigot
• M12 thread with wing nut
• Length: 5.5 inches (139.9mm)
• Chrome plated

• Ideal for photographers videographers and film makers on the go!
• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Included in the kit are a large size T-Handle grip head and T-Handle grip arm.
• Fitted with captive locking t-knobs on the column.
• Easily remove the column and attach to the Kupo Runway base to create a strong sturdy and safe rolling stand.

• Four way interconnectivity with a simple click.
• Removable central column.
• Aluminum brake castings for strength and safety.
• Double leg struts for maximum stability. 
• Bi-color injection molded knobs for a positive locking ergonomic grip.

• Four way interconnectivity with a simple click.
• Removable central column.
• Aluminum brake castings for strength and safety.
• Double leg struts for maximum stability. 
• Bi-color injection molded knobs for a positive locking ergonomic grip.