Studio Equipment & Accessories

What's included:

- PMI Extra-Strength Bubble Fluid

- Bubble Dish and Nozzle

- Cleaning Cloth

Learn More

• Creates contrast, changes lighting ratios, adds diffused light, or blocks light completely in specific areas
• Typically mounted on a C-stand connected with a grip head for precise light control
• Solid steel frame stitched with fabric
• 9.5mm dia. mounting pin welded to the steel frame
• Weighs only 2.52lbs (1.14kg)

Learn More

• 6 butterfly nuts equipped on the bar for a maximum of 6 lighting fixtures
• A compatible fit for a universal stand
• Solid steel square tube
• Length: 55.9in (1420cm)
• Max load 26.4lbs (12kg) for two sides. One side only, max load 13.2lbs (15kg).

Learn More

• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Base is five times stronger than aluminum
• Easily remove the column and attach to the Kupo Runway Base to create a strong sturdy and safe rolling stand.
• Fitted with captive locking t-knobs on the column.
• Limited two-year warranty

Learn More

• Replacement base for Master C- Stands with Turtle Base.
• Can be used as a very low stand
• Patented spring ring locking system enables you to open and close the base in under a second
• Zinc alloy casting for extra strength
• Max load: 66.1lbs (30Kg) Max height: 13.8" (35cm)

Learn More

• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Base is five times stronger than aluminum
• Easily remove the column and attach to the Kupo Runway Base to create a strong sturdy and safe rolling stand.
• Fitted with captive locking t-knobs on the column.
• Designed with three varied leg heights allowing stand bases to stack on set with equipment or nest together for storage

Learn More

• Fork has four pointed steel pins with a black coating
• Fork stabs into the foam center for stability, then stud can be placed in a grip arm or other receiver
• Weight: 0.4kg (0.88 lbs)
• Comes with a 5/8" baby stud
• Limited two-year warranty

Learn More

• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Base is five times stronger than aluminum
• Easily remove the column and attach to the Kupo Runway Base to create a strong sturdy and safe rolling stand.
• Fitted with captive locking t-knobs on the column.
• Limited two-year warranty

Learn More

• Unique spring locking system
• Extends to over 12' in height
• Extends from 39.4" - 66.9" (100cm - 170cm)
• No tools required
• Limited two-year warranty

Learn More

• Unique spring locking system
• Extends to over 12' in height
• Extends from 39.4" - 66.9" (100cm - 170cm)
• No tools required
• Limited two-year warranty

Learn More

• Quick mounting clamp for off-camera flash
• Alli Clamp with 5/8" baby studded tapped with a 3/8"-16 female thread and a baby receiver
• Steel construction
• Limited two-year warranty

Learn More

• Refillable 22.4lb (10.2kg) capacity sandbag
• Extra rivets, double stitching, interior bias binding for maximum strength
• Double handles on both top and bottom for more comfort. Hook and loop closure to support contents staying inside the bag
• Limited two-year warranty

Learn More

• 1/4"-20 male thread on one side
• Accepts any stud or tubing up to 5/8" (16mm)
• Mount monitors, off camera flashes or lightweight accessories
• Limited two-year warranty

Learn More

• Unique spring locking system
• Extends to over 12' in height
• Extends from 82.7"- 145" (210cm - 370cm)
• No tools required
• Limited two-year warranty

Learn More

• Adjustable arm allows positioning a camera lighting fixture or accessory within seconds
• Supports loads of up to 8.8 lbs (4 Kg)
• Large rubberized hand wheel allows joins to lock at same time for precise positioning
• Six milled flat surfaces for secure mounting
• Limited two-year warranty

Learn More

• 5/8" (16mm) socket inside
• attached to ball joint so it pivots from -45°to 90° and collar rotates 360°
• Includes 3/8"-16 thread which will accept the standard dot and camera accessories
• Weight: 0.86kg (1.90lbs)
• Limited two-year warranty

Learn More

• Dimensions: 5 1/2" x 3 5/8" x 1 3/8" | 14 cm x 9.2 cm x 3.5 cm
• Weight: 5 1/8 oz | 145 g

Learn More

• Large, powerful jaws
• 5/8" receiver
• Stud with 3/8"-16 female threads

Learn More

• 8-Channel HDMI Live Streaming Switcher
• Supports up to 1080p60
• RTMP Streaming via Ethernet or USB-C
• Record Program Out
• 11-Input, 2-Channel Audio Mixer
• Input Frame Rate and Format Converter
• Re-Sync on All HDMI Inputs
• HD Multiview Output with up to 16 Views
• Local and Software Switching
• 4 x Upstream, 2 x Downstream Keyers

Learn More

• 8-Channel HDMI Live Streaming Switcher
• Supports up to 1080p60
• RTMP Streaming via Ethernet or USB-C
• Record Program Out and Individual Inputs
• 11-Input, 2-Channel Audio Mixer
• Input Frame Rate and Format Converter
• Re-Sync on All HDMI Inputs
• HD Multiview Output with up to 16 Views
• Local and Software Switching
• 4 x Upstream, 2 x Downstream Keyers

Learn More

Learn More

• Durable 1/3-stop panel softens and evenly distributes light output
• Use in tandem with a Flex mat attached to Scrim Jim Cine frame
• Quickly and easily attaches to Scrim Jim Cine frame
• Reduces possibility of cross shadowing
• Ideal solution for softening 1x1 Flex LED mats

Learn More

The best mounting system for Flex 1x2 and 2x2 LED mats For use with Scrim Jim Cine light control framework Standard baby pin for easy mounting to grip arms or heads Durable metal construction Heavy-duty hardware Learn More

• The best mounting system for Flex 1x1, 1x2, and 1x3 LED mats
• For use with Scrim Jim Cine light control framework
• Standard baby pin for easy mounting to grip arms or heads
• Durable metal construction
• Heavy-duty hardware

Learn More

• Cost-effective backdrop system
• Instant studio setting for photo or video conferencing
• Includes lightweight stand, backdrop, and carry case
• Telescoping arms and hooks for grommets
• Travel-friendly weighing under 3 lbs.

Learn More