Studio & Lighting

• Made of a combination of goat leather and mesh backing
• Reinforced fingertips
• Additional layer of synthetic leather on palm, index finger, and thumb
• Size - Extra large

• Set includes 1 of each size: Pancake (20inx12inx1in), Quarter (20inx12inx2in), Half (20inx12inx4in) and Full Size (20inx12inx8in)
• Made of high-quality birch plywood that is built for long lasting use
• Internal supports are equipped in three larger size boxes for extra strength
• Rounded edges for ease of handling
• Can be used for a variety of applications on set, such as propping up furniture and light stands, leveling out dolly track, adding height to actors, or as temporay seats, etc

The Kupo Junior Boom Arm is made from solid steel with a black coated finish that can support a payload up to 88.2lbs (40kg) at minimum extension and up to 22lbs (10kg) when fully extended. 

This Kupo Mighty Runway Stand Base features an extra 4.7in (12cm) longer leg providing additional stability when it is necessary to make a boom rig. 

• Creates contrast, changes lighting ratios, adds diffused light, or blocks light completely in specific areas
• Typically mounted on a C-stand connected with a grip head for precise light control
• Solid steel frame stitched with fabric
• 9.5mm dia. mounting pin welded to the steel frame
• Weighs only 2.52lbs (1.14kg)

• 6 butterfly nuts equipped on the bar for a maximum of 6 lighting fixtures
• A compatible fit for a universal stand
• Solid steel square tube
• Length: 55.9in (1420cm)
• Max load 26.4lbs (12kg) for two sides. One side only, max load 13.2lbs (15kg).

• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Base is five times stronger than aluminum
• Easily remove the column and attach to the Kupo Runway Base to create a strong sturdy and safe rolling stand.
• Fitted with captive locking t-knobs on the column.
• Limited two-year warranty

• Replacement base for Master C- Stands with Turtle Base.
• Can be used as a very low stand
• Patented spring ring locking system enables you to open and close the base in under a second
• Zinc alloy casting for extra strength
• Max load: 66.1lbs (30Kg) Max height: 13.8" (35cm)

• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Base is five times stronger than aluminum
• Easily remove the column and attach to the Kupo Runway Base to create a strong sturdy and safe rolling stand.
• Fitted with captive locking t-knobs on the column.
• Designed with three varied leg heights allowing stand bases to stack on set with equipment or nest together for storage

• Fork has four pointed steel pins with a black coating
• Fork stabs into the foam center for stability, then stud can be placed in a grip arm or other receiver
• Weight: 0.4kg (0.88 lbs)
• Comes with a 5/8" baby stud
• Limited two-year warranty

• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Base is five times stronger than aluminum
• Easily remove the column and attach to the Kupo Runway Base to create a strong sturdy and safe rolling stand.
• Fitted with captive locking t-knobs on the column.
• Limited two-year warranty

• Unique spring locking system
• Extends to over 12' in height
• Extends from 39.4" - 66.9" (100cm - 170cm)
• No tools required
• Limited two-year warranty

• Unique spring locking system
• Extends to over 12' in height
• Extends from 39.4" - 66.9" (100cm - 170cm)
• No tools required
• Limited two-year warranty

• Quick mounting clamp for off-camera flash
• Alli Clamp with 5/8" baby studded tapped with a 3/8"-16 female thread and a baby receiver
• Steel construction
• Limited two-year warranty

• Refillable 22.4lb (10.2kg) capacity sandbag
• Extra rivets, double stitching, interior bias binding for maximum strength
• Double handles on both top and bottom for more comfort. Hook and loop closure to support contents staying inside the bag
• Limited two-year warranty

• 1/4"-20 male thread on one side
• Accepts any stud or tubing up to 5/8" (16mm)
• Mount monitors, off camera flashes or lightweight accessories
• Limited two-year warranty

• Unique spring locking system
• Extends to over 12' in height
• Extends from 82.7"- 145" (210cm - 370cm)
• No tools required
• Limited two-year warranty

• Adjustable arm allows positioning a camera lighting fixture or accessory within seconds
• Supports loads of up to 8.8 lbs (4 Kg)
• Large rubberized hand wheel allows joins to lock at same time for precise positioning
• Six milled flat surfaces for secure mounting
• Limited two-year warranty

• 5/8" (16mm) socket inside
• attached to ball joint so it pivots from -45°to 90° and collar rotates 360°
• Includes 3/8"-16 thread which will accept the standard dot and camera accessories
• Weight: 0.86kg (1.90lbs)
• Limited two-year warranty

• Steel Construction

• Standard VESA mounting holes 75x75mm & 100x100mm
• Supports up to 17.6lbs (8kg)
• Easy and instantaneous rotatation of a monitor from landscape to portrait viewing
• 5/8in (16mm) Baby Receiver and knob to secure to any baby light stand or accessory
• One central knob securely locks two ball heads

• nnovative modular system
• Many interchangeable accessories available
• Single knob secures both ball joints simultaneously
• Constructed from aluminum alloy

• Supports 17.6 lb, Modular System
• Interchangeable Accessories Available
• Single Knob Secures Both Ball Joints
• Aluminum Construction

• Supports 17.6 lb, Modular System
• Interchangeable Accessories Available
• Single Knob Secures Both Ball Joints
• Aluminum Construction

• Allows the spigot to be attached to a lighting yoke
• 28mm steel spigot
• M12 thread with wing nut
• Length: 5.5 inches (139.9mm)
• Chrome plated

• Ideal for photographers videographers and film makers on the go!
• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Included in the kit are a large size T-Handle grip head and T-Handle grip arm.
• Fitted with captive locking t-knobs on the column.
• Easily remove the column and attach to the Kupo Runway base to create a strong sturdy and safe rolling stand.

• Four way interconnectivity with a simple click.
• Removable central column.
• Aluminum brake castings for strength and safety.
• Double leg struts for maximum stability. 
• Bi-color injection molded knobs for a positive locking ergonomic grip.

• Four way interconnectivity with a simple click.
• Removable central column.
• Aluminum brake castings for strength and safety.
• Double leg struts for maximum stability. 
• Bi-color injection molded knobs for a positive locking ergonomic grip.

• Load Capacity: 8.8 lb, Folded Length: 27.9"
• Lightweight aluminum weighing only 2.42lb
• Air-cushioned to keep lighting safe when it is being lowered

• Lightweight telescopic arm with Tiny Clamp on one side
• Quick mounting
• Built in ball join that rotates 360 degrees

• Constructed with lightweight and durable aluminum providing a secure mounting option for virtually any type of shoe-mounted device 
• Variable tension knob locks securely around the foot of any flash

• Easy latch and release for the locking collar
• Handles tube sizes from 1.4"-2.0" (35m-50mm)in diameter
• Mount any light fixture or accessory up to 66lbs (30Kg)
• 4 recessed mounting locations distributed in 90 degree increments

• Designed for studio or location shooting
• Unique interlocking mechanism allows the stand to fold flat and click to other stands quickly
• Lightweight aluminum alloy

• Can mount securely on round or square object and just about any unique shape up to 4" (11cm)
• Jaw position remains fixed on one side enabling mounting in limited space
• Specially formulated grip pad holds tight, yet protects the surfaced it's clamped around
• Large load capacity of 66.1lbs (30Kg)
• Hexagonal receiver that works in conjunction with Convi Clamp accessories

•  4" (10.16cm) Long Junior 1-1/8" (28mm) Receiver 
• Chrome Plated Steel Finish 

•  5/8" (16mm) Receiver All Metal Construction Locking Knob.   
• Attaches easily to an intersection in the metal grid that supports ceiling tiles
• Perfect for trying to find a suitable mounting point on drop ceilings

•  3" (7.62cm) Long Baby 5/8" (16mm) Stud. 
• Chrome Plated Steel Finish with 8 Anchor Holes

• Kupo 2.6" (66mm) Long 5/8" (16mm) Stud Threaded Locking Collar 
• Attaches quickly to any mounting locations on 3 way or 4 way clamp
• Accept any light fixture or accessory with a baby 5/8" (16mm) receiver

• Kupo 4.25" (108mm) Long 5/8" (16mm) Stud Threaded Locking Collar
• Constructed from solid steel with chrome plated surface treatment

• Length 29.5" (75cm) Diameter 0.14" (3.5mm) 
• Load Rating 22lbs (10Kg) 
• Locking "D" Ring Closure 

• 5/8" (16mm) Snap In Pin. Hex Stud on One Side, and Baby Stud on the other.

This 5" (12.7cm) steel Baby 5/8" (16mm) pin is designed to be mounted in the head of a grip head or grip arm and still have a few inches sticking out of the head where a light fixture or any other accessory with a baby receiver can be mounted. The combination of a grip head and grip arm give flexibility to position light fixtures or any accessory with a baby receiver virtually anywhere. The End Collar will save light fixtures or accessories by preventing the pin from slipping through the grip head if it ever loosens unexpectedly. 

Hexagonal Mounting Stud Baby 5/8" (16mm) Adapter with 3/8"-16 Male Thread

• Two Baby 5/8" (16mm) Receivers Umbrella Receiver 1/4"-20 Camera Mounting Screw with Locking Collar 
• Perfect for the Kupo Max Arm KGKG100211 and KG100911

• Adjustable arm allows positioning a camera lighting fixture or accessory within seconds.
• Supports loads of up to 8.8 lbs (4 Kg)
• Joints loosen and tighten simultaneously with a single handle 
• Six milled flat surfaces for secure mounting

• Mini extension arm with a hexagonal stud on one side  and a baby 5/8" (16mm) receiver on the other
• Designed for the Convi and Super Viser clamps
• Aluminum construction with steel ball clamps

• Has a ratcheted handle that allows the user to rotate it in a complete circle to tighten or loosen in tight operating spaces
• Features a hexagonal receiver that works with dozens of Convi accessories
• Supports loads of up to 44lbs (20kg)
• Made of a lightweight alloy with a black finish

• Has a ratcheted handle that allows the user to rotate it in a complete circle to tighten or loosen in tight operating spaces
• Features a hexagonal receiver that works with dozens of Convi accessories
• Supports loads of up to 44lbs (20kg)
• Made of a lightweight alloy with a silver finish

BLACK STAND HANGER F/STUDIO OR TRUCK 46.5"

• Multipurpose Applications
• For Studio or On-Location Use
• Made of 9-Ply Baltic Birch Wood
• Smooth Natural Finish

• Folded length  19.2" (49cm) ideal for any standard size suitcase
• Made of aluminum and weights only 2.4lb (1.1Kg)

• Designed to hold Kino Flo tubes.
• Built with a swivel ball joint for easy positioning and safety of the tubes.
• Change tubes safely and effectively while working with coated Kino Flo tubes.
• Limited two-year warranty

• Two jaws are aluminum making it sturdy and durable
• Mechanical interlocking rubber pads are adhered to the jaws
• The casting knob offers a better grip
• 1/4" and 3/8"female sockets can be used simultaneously in small spaces
• Inside steel spring keeps the jaws moving smoothly while twisting the knob

While Supplies Last!

• Works with the 3-way and 4-way clamp
• Allows mounting of a series of light modifiers in a row
• Lightweight aluminum clamp for 5/8" (16mm) tubing

• Quick mount multipurpose clamp
• Works on both flat and round surfaces
• Has one fixed baby 5/8" (16mm) stud and one reversible baby 5/8" (16mm) receiver
• Jaws can be adjusted from 0.98"-2.56" (25-65mm)

• Steel spring Clamp
• 3 attachment methods: spring tension clamp, 5/8 female socket and a baby 5/8" stud.
• Jaws open from 0.2"-1.6" (5-40mm)
• Black finish

• allows vertical or horizontal mounting of a light fixture, flash, or camera that has a 3/8"-16 threaded receptor
• Locking adapter for 5/8” light stand 
• Set screw locks firmly in place

• Heavy duty coupler fits tubes with diameters of 2" (51mm)
• Position a light head or grip head at a lower position or mount an additional light without the need for another stand
• Total length of 15" (380mm) and double baby pins

• Ideal for photographers videographers and film makers on the go!
• Unique Patented innovative spring ring locking system allowing for easy set-up and take down.
• Included in the kit are a large size T-Handle grip head and T-Handle grip arm.
• Fitted with captive locking t-knobs on the column.
• Easily remove the column and attach to the Kupo Runway base to create a strong sturdy and safe rolling stand.

• Base with braked wheels for making C Stands mobile
• Junior 1-1/8" (28mm) receiver
• Legs fold parallel for easy transport and storage

• Four different sized V shaped jaws to accept any accessory with a 5/8", 1/2", 3/8" or 1/4" mounting stud or tubing
• Oversized ergonomic T handle 
•  V shaped jaws have teeth that grab whatever is mounted between the plates securely
• Color - Black
• 2 1/2" grip head on 40" steel tubing