Accessories

• For Blink 500 Wireless Mic Systems
• Omni Lavalier Mic & Built-In Omni Mic
• 3.5mm Microphone Input Connector
• Easy to Use, Plug & Play Operation

• 5" On-Camera Monitor
• 800 x 480 Resolution
• 1080p Full HD Input
• 1 x HDMI Input, 1 x HDMI Output

• 8.9" 1920 x 1200 LCD Display
• Supports 1080p Full HD Input
• Built-In Speaker, Headphone Output
• Waveform / RGB Parade / Vectorscope

1. Designed for Sony mirrorless cameras.
2. Remote control of the camera. 
3. Made of handcrafted rosewood, comfortable and attractive.
4. The handgrip can be adjustable with a range of 360°
5. Ergonomic design provides a comfortable grip.

• Balance Heavy Cameras on Gimbal
• For DJI Ronin-S & Ronin-SC Gimbals
• For Zhiyun-Tech CRANE & WEEBILL LAB
• Mounts onto Gimbal Side Arm

• Sliding Offset Camera Positioning
• Mount BMPCC 6K & 4K Camera on Gimbal
• For DJI Ronin-S & Zhiyun Crane-2 Gimbals
• Also Works with Moza Air 2

1. Modular Cage Designed for SIGMA fp Camera.
2. Multiple 1/4"-20 & ARRI 3/8”-16 Accessory Threads.
3. Integrated Cold Shoe Mount for Mic or Light.
4. Clamps Both HDMI and USB Cables on the Left Side.
5. Built-in Flat-Head Screw Driver.
6. Compatible with Sigma LVF-11 LCD Viewfinder.

• Shoe Mount for Accessories
• Designed for DJI Ronin-S and Ronin-SC
• Mounts with Two Captive M4 Screws
• Safety Locking Design to Prevent Slips

• For SmallHD FOCUS 5" On-Camera Monitors
• Anti-Twist Design with Dual Lock Points
• Multiple 1/4"-20 and 3/8"-16 Threads
• Dark Olive Finish, Sun Hood Included

1. Supports 5” and 7” monitor up to 1.2kg.
2. Swivel 360° and tilt 140° with free-stop in any position.
3. Features holes on thumbscrews for hex spanner.
4. Rubber pad on the top to prevent scratch.
5. CNC-Machined aluminum construction, robust & durable.

1. Fits Samsung T5 SSD, Angelbird SSD2go PKT, Glyph Atom SSD, SanDisk 1T SSD, G-Technology G-DRIVE Mobile SSD and more.
2. Spring-loaded clamp holds the SSD securely.
3. Mounts to the camera rig by the cold shoe or 1/4"-20 screws.
4. A USB-C cable clamp included.
5. Soft rubber pads inside preventing scratches.

• Fits Microphones 0.7 to 1" in Diameter
• Cold Shoe Mount
• Silicone Pads Cushion Mic Against Bumps
• Thumbscrew Fastener

1. Designed for DJI Ronin S Gimbal.
2. Allows balancing of front-heavy camera setup.
3. Comes with rows of 1/4”-20 threaded holes to support counterweights.
4. Features precise scale on the side to mark camera position.
5. Compatible with the original lens support of Ronin S.
6. Comes with rubber pad to prevent scratching your camera.

1. A form-fitting cage designed for Atomos Shinobi.
2. NATO rails on the top and bottom.
3. 1/4’’-20, 3/8’’-16 and ARRI locating holes.
4. HDMI cable clamp included.

1. Compatible with Sony A6400 cage 2310. 
2. Nice sized wooden handgrip on the right for a better hand-held shooting experience.
3. Maintains the infrared receiver of camera access.
4. Avoids the uncomfortable hand-held shooting due to the overheating of the camera.

1.A dedicated half cage for BMPCC 4K and 6K
2.Multiple mounting points (NATO railS, 1/4’’-20 and 3/8’’-16 threaded holes, ARRI locating holes and cold shoe) for accessories
3.Form-fitting design with unobstructed camera grip, button, port and battery access.
4.Securely locked by 1/4’’-20 screws on the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles
5.Compatible with SmallRig Mount for Samsung T5 SSD, HDMI & SSD Cable Clamp, Metabones Adapter Support and other accessories

1. A dedicated baseplate designed for BMPCC 4K & 6K.
2. Arca compatible QR plate and receiver on the top and secured by a knob screw.
3. 15mm rail support at 85mm rod height.
4. Arri standard dovetail on the bottom.
5. 1/4"-20 and 3/8"-16 threaded holes on the bottom for attachment of other plates.

1. A dedicated baseplate designed for BMPCC 4K & 6K.
2. Manfrotto 501PL compatible QR plate and receiver on the top and secured by a lever.
3. 15mm rail support at 85mm rod height.
4. Arri standard dovetail on the bottom.
5. 1/4"-20 and 3/8"-16 threaded holes on the bottom for attachment of other plates.

1. Accommodate and protect Samsung T5 SSD.
2. Switchable to be used on both left and right hands.
3. Compatible with SmallRig BMPCC 4K & 6K cage 2203, 2254 and 2255, and Z CAM E2 cage 2264.
4. 1/4 and 3/8 threaded holes on the top for attaching accessories.
5. Ergonomic design and comfortable grip.

1. A form-fitting cage designed for Atomos Ninja V.
2. NATO rails on the top and bottom.
3. 1/4’’-20, 3/8’’-16 and ARRI locating holes.
4. An HDMI cable clamp included.
5. Drive locks for Atomos Master Caddy II.

1. For balancing your camera on Gimbal Stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 100g Counterweight, 1.1” in diameter.

1. For balancing your camera on gimbal stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 200g counterweight, 1.46” in diameter.

1. Supports 5” and 7” monitor up to 1.2kg.
2. Swivel 360° and tilt 150° allows free-stop in any position.
3. Hex spanner holes for re-tighten the screw to ensure safe. 
4. Rubber pads on the top to prevent scratching your monitor. 
5. Weighs only 68g, easy for storage.

• Rugged, lightweight aluminium body for stable positioning on long microphone boom arms
• Lightweight high-performance voice coil construction
• Fast transient response
• Low frequency extension
• Ideal for direct use on the most problematic bass signal
• Frequency-independent directivity provides isolation from other on-stage signals
• Humbucking coil
• Integral stand mount

• L-shaped drum clamp
• Fits e604 and e904