Accessories

Monitor Wireless Video up to 1300' Away

7" Touchscreen 1920 x 1200 Display

Transmitter & Receiver Mode Switching

New Capsule Antennas & Record/Playback

One Transmitter Can Send to 4 Receivers

1080p SDI Input; Up to UHD 4K30 via HDMI

High 1200 cd/m² Brightness

Auto Frequency Hopping, 2.4/5 GHz Bands

RTMP Streaming, USB/SD Card Import/Save

Built-In Dual L-Series Battery Plate

For Videographers, YouTubers, Creators

Clip-On Transmitters with Mic + Lavalier

Receiver with USB-C, Lightning & 3.5mm

2-Stage Noise Cancellation

Stereo, Mono & Safety Modes

Real-Time Headphone Monitoring

Remote Gain & App Control

30+ Hours with Charging Case

984' Operating Range

Camera control & touch to focus on supported cameras

Record in Apple ProRes, Avid DNx or H.265

Quieter, cooler temperature while using

Capture to CFexpress Type B or USB-C storage

Super-bright, 1500nit 5-inch touchscreen display

HDMI 2.0, 12G-SDI & Wi-Fi 6E input and output

Direct upload to ATOMOSphere, Frame.io, Dropbox

Streaming via NDI 6

Timecode sync over RF or Bluetooth

Powered by USB-C, NP-F battery or AC adaptor

Get 20GB cloud storage FREE with ATOMOSphere

Over the air (OTA) firmware updates

7" HDR touchscreen display, 1920 x 1080 resolution

Wi-Fi camera control, remote focus, and streaming capability

4K60 HDMI 2.0 and HD 3G-SDI input/output

Ultra-bright 2200 cd/m² screen for daylight viewing

Dual L-Series battery slots and USB-C PD power input

HDMI/SDI cross-conversion for flexible connectivity

AtomOS with 3D LUT support and LANC camera control

10-stop dynamic range for accurate monitoring

Supports multiple Log formats and advanced image analysis tools

Headphones:
Driver Diameter: φ 50mm
Frequency Response: 20Hz to 28kHz
Sensitivity: 98dB/mW
Impedance: 32 Ohms
Maximum Input Power: 800mW
Audio Input: Locking 3.5mm Female
Dimensions: 8.4 x 7 x 3.6” (214.4 x 178.3 x 91.6mm)
Weight: Approximately 13.2oz (373g)

SMALLRIG 15mm Rods (2.5 Inch, 2pcs)

1. Used with any industry-standard 15mm rod rail system.
2. The clamp is solidly engineered with high-quality aluminum alloy for durability.
3. One locking ratchet lever to tighten rod clamp and cold shoe. 
4. 1/4" threads for attaching more accessories.

• Full Cage for Mirrorless Camera or DSLR
• Compatible with Smaller Cameras
• Adjustable Height & Width on Both Sides
• Non-Slip Camera Plate with 1/4"-20 Screw
• 1/4"-20 & 3/8"-16 Accessory Threads
• Hot Shoe Adapter
• Includes 2 x Short & 2 x Long Side Arms
• Aluminum Alloy Construction

• Four-Point Suspension System
• Fits Mics Measuring 0.6-1.6" in Diameter
• Locking Tilt Knob
• Includes Shoe Mount

• Isolates microphone from vibration and noise.
• Fits Mics Measuring 0.59-1.57"(15-40mm) in Diameter.
• Mount onto 15mm Rods Directly.
• Angle is adjustable to adapt different shooting scene.