Accessories

1. A dedicated baseplate designed for BMPCC 4K & 6K.
2. Arca compatible QR plate and receiver on the top and secured by a knob screw.
3. 15mm rail support at 85mm rod height.
4. Arri standard dovetail on the bottom.
5. 1/4"-20 and 3/8"-16 threaded holes on the bottom for attachment of other plates.

1. A dedicated baseplate designed for BMPCC 4K & 6K.
2. Manfrotto 501PL compatible QR plate and receiver on the top and secured by a lever.
3. 15mm rail support at 85mm rod height.
4. Arri standard dovetail on the bottom.
5. 1/4"-20 and 3/8"-16 threaded holes on the bottom for attachment of other plates.

1. Accommodate and protect Samsung T5 SSD.
2. Switchable to be used on both left and right hands.
3. Compatible with SmallRig BMPCC 4K & 6K cage 2203, 2254 and 2255, and Z CAM E2 cage 2264.
4. 1/4 and 3/8 threaded holes on the top for attaching accessories.
5. Ergonomic design and comfortable grip.

1. A form-fitting cage designed for Atomos Ninja V.
2. NATO rails on the top and bottom.
3. 1/4’’-20, 3/8’’-16 and ARRI locating holes.
4. An HDMI cable clamp included.
5. Drive locks for Atomos Master Caddy II.

1. For balancing your camera on Gimbal Stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 100g Counterweight, 1.1” in diameter.

1. For balancing your camera on gimbal stabilizers by adjusting its quantity and position.
2. Features a 1/4“-20 screw and 1/4”-20 threaded hole to support counterweight.
3. 200g counterweight, 1.46” in diameter.

1. Supports 5” and 7” monitor up to 1.2kg.
2. Swivel 360° and tilt 150° allows free-stop in any position.
3. Hex spanner holes for re-tighten the screw to ensure safe. 
4. Rubber pads on the top to prevent scratching your monitor. 
5. Weighs only 68g, easy for storage.

• Rugged, lightweight aluminium body for stable positioning on long microphone boom arms
• Lightweight high-performance voice coil construction
• Fast transient response
• Low frequency extension
• Ideal for direct use on the most problematic bass signal
• Frequency-independent directivity provides isolation from other on-stage signals
• Humbucking coil
• Integral stand mount

• L-shaped drum clamp
• Fits e604 and e904

• 25ft XLR Microphone Cable
• 9.0 oz